Air Conditioner Installation for Homes and Offices
A split system air conditioner is a great option for keeping your home cool and comfortable in the summer months. These units are also quieter, easier to install, and more energy efficient than central air conditioning. This type of A/C is ductless, so all you have to do is install the cooling unit inside and the compressor and condenser unit outside, then run piping and a power cable between the units. If you don’t want to hire a professional to install a split system air conditioner and you have some experience with plumbing and electrical work, you can install the unit on your own. Each air conditioning unit is unique to its manufacturer, but the general installation process is the same.
Several factors have to considered during the installation of split air conditioner.
Strength of wall to hold the AC
The indoor unit of split AC must be installed on a wall strong enough to hold the unit’s weight.Proper spacing between wall and AC unit
The indoor unit of split AC requires at least 15 cm of open space surrounding its top and sides for proper air flow.Appropriate installation height from ground
Mount the indoor unit of split AC at a height of 7-8 feet above the ground for adequate cooling inside the roomCorrect tilt angle of indoor unit
While fixing the aluminium bracket on wall make sure that the bracket is given a slight tilt angle, so that the indoor unit of split AC, when fitted is also at a slight angle to enable unrestricted flow of the condensed water from the drain pipe.Correct location of outdoor unit
For proper cooling, mount the indoor and outdoor units of split AC at location away from direct sunlight and water. Install the outdoor unit of split AC in open space so that there is no hindrance to the heat dissipated from the condenserProper placement of outdoor unit
The outdoor unit of split AC must be placed on a flat and rigid surface. This unit contains key components of split AC like compressor, condenser, fan motor etc. If the unit is not on a flat surface then it will vibrate excessively, which can lead to the breakage of copper pipes, coolant leakage and compressor/condenser damage. Further, the vibrating unit makes lots of noise which could disturb you and your neighbours.Right distance between indoor and outdoor unit
Correct distance between the indoor and outdoor unit plays a very important role in cooling. The coolant at very low temperature flows inside the copper tubes between indoor and outdoor units of split AC. There is always some loss of cooling effect to the atmosphere when the refrigerant flows between the units. Hence to reduce this loss, keep the distance between the indoor unit of split AC and the outdoor unit of split AC as minimum as possible. The maximum allowable distance between the indoor and the outdoor units of split AC can be about 15 meters.- Axle Shaft Seal full setup replacement and clean
- Battery Cable replacement and speed up charging
- ABS Control Module replacement and repair.
- Exhaust Muffler repair and free replacement
- Fuel Filter replacement Seal full setup cleaned
- Axle Shaft Seal full setup replacement and clean
- Battery Cable replacement and speed up charging
- ABS Control Module replacement and repair.
- Exhaust Muffler repair and free replacement
- Fuel Filter replacement Seal full setup cleaned
Cost for Related Repairs
Service hour
- Monday 9.30 am - 6.30 pm
- Tuesday 9.30 am - 6.30 pm
- Wednesday 9.30 am - 6.30 pm
- Thursday 9.30 am - 6.30 pm
- Friday 9.30 am - 6.30 pm
- Saturday 9.30 am - 6.30 pm
- Sunday Holiday